Índice
Tudo sobre o processo de soldadura por refluxo da montagem SMT
Soldering is a fundamental operation in fabrico de eletrónica, using high temperatures to create both electrical and mechanical contacts. The joints must have good electrical conductivity along with being able to hold parts firmly in place on printed circuit boards (PCBs). Among numerous soldering processes—such as soldadura por ondas, manual soldering, and selective soldering—reflow soldering is the common process used for surface-mount technology (SMT) assemblies.
Once reserved for factory use, reflow soldering is now accessible to hobbyists and engineers in the form of small benchtop systems. High-end reflow ovens possess excellent temperature control, often maintaining variations to ±2°C across the PCB by multi-zone convection heating. This degree of accuracy is paramount for high-reliability applications like aeroespacial e medical electronics, where solder joint reliability has a direct impact on the safety and functionality of the product.
What is Reflow Soldering?
Reflow soldering is a heat-controlled technique used for mounting surface-mount components (SMDs) onto PCBs in a secure manner. The technique uses the deposition of solder paste—a combination of tiny particles of solder and flux—onto the contact pads of the PCB. SMDs are then placed on the paste, and the entire assembly is subjected to a reflow oven where controlled heat is used to melt the solder, forming robust electrical and mechanical bonds.
Abaixo está o vídeo detalhado do PCBA no forno de refluxo!
How to Reflow Soldering: The Reflow Soldering Process
Reflow soldering is a process involving several steps that converts properly applied solder paste into permanent mechanical and electrical joints. The whole process demands careful coordination of materials science, thermal dynamics, and precision mechanics.
Solder Paste: Composition & Application
The key to successful reflow soldering is solder paste formulation. The advanced material has a toothpaste-like feel and appearance but consists of microspheres of solder alloy (typically SAC305 – 96.5% tin, 3% silver, 0.5% copper) in flux vehicle suspension. Particle size distribution adheres to IPC classes (Type 3-5), with the finer powders permitting deposition onto high-density interconnects (HDI) below 0.4mm pitch. Flux chemistry plays a number of important functions: removing surface oxides when heated, decreasing surface tension to improve wetting, and providing temporary adhesion when placing components. Handling of materials should be correct – solder paste should be kept under refrigeration at 2-10°C under close control of shelf life to prevent solvent separation that degrades print performance.
Solder Paste application is accomplished through laser-cut stainless steel stencils of standard thickness 0.1-0.15mm, which are directly made from the StopMask layer of a PCB design in Ficheiros Gerber. The stencil acts as an accuracy mask, thus solder paste will deposit only on targeted pads. In production of prototypes, syringe dispensing by hand can substitute stencil printing automatically, though with poorer positional accuracy and volume control.
Component Placement: Accuracy Positioning
With solder paste in place, SMDs are mounted with unmatched accuracy. Industrial manufacturing in automated fashion employs computer-controlled pick-and-place equipment capable of placing over 20,000 parts in one hour with vision-guided placement accuracy of 0.025mm. Such sophisticated systems can deal with parts from tiny 0201 resistors (0.6×0.3mm) to complex ball-grid-array (BGA) packages with hundreds of leads. Low-volume prototyping engineers can place components by hand with vacuum pens or fine-tipped tweezers with magnification and rely on the natural tack of the paste to keep parts in position prior to reflowing. The temporary strength of solder paste in the short term becomes particularly critical for heavy pieces or working with boards between placement and oven loading.
Thermal Profiling: Process Control
The transformation into permanent joint occurs within the reflow oven’s precisely crafted thermal atmosphere. Modern systems have a number of independent heating zones (typically 5-12) which generate distinct time-temperature relationships known as thermal profiles. Development of these profiles considers a few variables: the needs of solder paste manufacturers, the thermal characteristics of the PCB substrate (specifically the glass transition temperature Tg of FR-4 compounds), and differences in thermal masses between small passive components and large ICs. Engineers double-check profiles by mounting thermocouples on test boards and taking actual thermal measurements at critical points according to IPC-7530 specifications. This scientific process ensures all the joints solder to sufficient temperature for proper intermetallic formation without harming delicate components due to heat.
The Four Critical Stages of Reflow Thermal Profiling
Reflow soldering requires precise operation in four separate thermal phases with their own metallurgical and chemical functions:
Stage 1: Ramp to Soak
This first heat stage gradually increases the assembly temperature at regulated rates between 1-3°C per second. The deliberate ramping is due to the following purposes: preventing thermal shock to parts, allowing for uniform heat distribution across the PCB, and initiating evaporation of solvents from solder paste. Abrupt temperature transitions at this stage will cause splattering of paste and stressing of components, while insufficient heating rates can trap volatile constituents in the deposit. The slow heating ensures every board area achieves an even base temperature prior to the onset of the next critical stage.
Stage 2: Thermal Soak Zone
Keeping the assembly temperature at 150-180°C on a flat, constant plateau for 60-120 seconds completes many required chemical reactions. Flux activation is most effective within this temperature range, removing oxides from Almofadas de PCB and component leads aggressively, according to IPC J-STD-004 grades. Solvents fully vaporize, preventing voiding in subsequent processes. This increased residence time is particularly critical for large assemblies or boards having large thermal mass differences since it minimizes thermal differentials between tiny pieces and large devices like BGAs. Process engineers must at all costs avoid going above approximately 200°C during this step, since high temperatures cause premature oxidation of solder particles, while low temperatures render activation of flux incomplete.
Stage 3: Reflow Zone (Time Above Liquidus – TAL)
Assembly continues now in the crucial stage of melting of solder particles and metallurgical bonding. Temperatures are 30-50°C higher than the melting point of the alloy (tin-lead 183°C, SAC305 lead-free alloys 217-220°C). Lead-free processing as mandated by RoHS directives brings unique challenges – requiring maximum temperatures of 240-250°C approaching the thermal limits of most parts and Materiais para PCB. Most centers currently use nitrogen atmosphere ovens to prevent oxidation at these high temperatures. Time above liquidus temperature (TAL) is typically 45-90 seconds – long enough for surface tension forces to align components (“self-centering”) and for flux to fully strip surface oxides, but not long enough to produce excessive intermetallic growth or component damage. This excellent balance requires maintaining temperatures at least 5°C below the most temperature-sensitive component’s rating (always verified from component datasheets). Insufficient time or temperature generates cold joints with crystalline microstructures and potential solvent entrapment, while excessive exposure deteriorates flux performance and risks thermal semiconductor damage.
Stage 4: Controlled Cooling Zone
The final thermal stage manages solidification through controlled cooling at 2-4°C per second. Slow temperature reduction allows proper crystalline growth in the solder joint, leading to mechanically stable interconnections. Increased cooling rates produce smaller grain sizes with improved mechanical properties but induce thermal stress cracks in ceramic components or plastic-packaged devices. Rates of cooling greater than 4°C/second increase brittle intermetallic layers at part surfaces that fracture when mechanical stress is imposed. Cooling rate slope should be carefully controlled, particularly in advanced applications like aerospace electronics where thermal cycling reliability is the greatest concern.
Causes & Strategies of Reflow Soldering Defects
Even with sophisticated equipment and controls, a variety of common flaws can compromise solder joint integrity when processes deviate from optimal parameters:
- Tombstoneamento refers to the state where passive components (like resistors or capacitors) stand up at one end. This is essentially an unbalanced heating between pads of components or asymmetrical pad designs. Prevention includes careful thermal balancing through board layout and symmetrical land patterns with equal copper area and trace connections to both pads.
- Esferas de solda appears as discrete balls around joints, commonly the result of excess volume of solder paste or overly aggressive heating in the ramp phase. Solder Balling control consists of optimizing stencil apertures to prevent over-deposition and ramp rates lower than 2°C/second to allow solvent evaporation slowly before pastes liquefy.
- Void Formation within solder joints leads to potential reliability problems, particularly under high-current loading. Such gas bubbles typically occur due to volatiles trapped in or as a result of contamination. Paste formulation selection with appropriate metal content, long soak times for complete evaporation of solvents, and, in high-reliability applications, special vacuum reflow processing that actively evacuates gas during solidification, are the countermeasures.
- Cold Solder Joints are poorly wetted and have crystal structures that are harmful to conductivity and mechanical integrity. The primary cause is poor peak temperature or too little time above liquidus. Inspection entails careful inspecção visual (with magnification) for grainy, rather than shiny surfaces, but for hidden joints like BGAs, Inspecção por raios X is required.
- Head-in-Pillow Defects occur in BGA assemblies when paste and solder balls fail to merge, resembling a head on a pillow. This complex defect typically occurs due to component warpage as it is being heated up or because of excessive oxidation at the surface of the balls. High-end solutions include nitrogen atmosphere processing to prevent oxidation and pre-baking parts to eliminate moisture that leads to warping.
| Defeito | Causes | Prevention Strategies |
| Tombstoneamento | Uneven pad heating | Symmetric pad design + thermal balancing |
| Solder Balls | Excessive paste or rapid ramp | Stencil optimization + 1-2°C/sec ramp |
| Voiding | Trapped gases/contaminants | Paste formulation + vacuum reflow |
| Cold Joints | Temperatura máxima insuficiente | Thermal profiling + X-ray inspection |
| Head-in-Pillow | BGA warpage/Oxidation | Nitrogen atmosphere + pre-bake |
Engineering Excellence in PCBA Manufacturing
PCBA FS prides itself in using scientific process control for utmost assembly reliability. We utilize latest-generation multi-zone convection ovens with ±1°C temperature uniformity, validated with real-time thermal profiling through the use of high accuracy K-type thermocouples. Our process engineers adhere strictly to IPC-A-610 acceptability standards and J-STD-001 soldered electrical assembly requirements. For high-reliability BGA and QFN components, automated X-ray inspection is applied to inspect joint integrity and quantify non-destructive voiding percentages.
Whether to make prototypes or for quantity production runs, we recognize that reflow precision processing eliminates field failures – especially in the automóvel, medical, and aerospace industries where solder joint reliability defines safety-critical operations. Our engineering personnel provide complete Design for Manufacturing (DFM) analysis to balance layouts for thermal consistency and prevent common defects at their outset.
Soldadura por Refluxo FAQ
Tanto a soldadura por onda como a soldadura por refluxo são processos cruciais na montagem de placas de circuito impresso, servindo o objetivo de estabelecer ligações entre placas de circuito impresso e componentes.
A soldadura por refluxo é normalmente utilizada em cenários que envolvem SMD devido aos seus pinos densamente compactados e à sua elevada sensibilidade às variações de temperatura.
Por outro lado, a soldadura por onda é normalmente utilizada para Componentes DIP, que possuem pinos maiores. Neste processo, a placa de circuito é passada sobre uma onda de solda derretida, permitindo que a solda líquida cubra toda a área da almofada. Através do princípio da tensão superficial, a solda derretida forma juntas de solda com os pinos do componente, garantindo uma ligação robusta e fiável.
Um dos factores-chave na seleção de um parceiro para o fabrico de PCBA é prestar atenção ao equipamento de produção utilizado. Quando se trata de equipamento de soldadura por refluxo, a capacidade de controlo da temperatura de cada zona de temperatura desempenha um papel crucial na garantia de uma qualidade de soldadura superior. Os fabricantes, como a FS Technology, dão prioridade à utilização de equipamento avançado de soldadura por onda na zona de temperatura 10, que oferece maior comodidade e precisão.
Ao investir em equipamento com controlo de temperatura independente em cada zona, os fabricantes podem obter perfis térmicos ideais e regular com precisão a temperatura ao longo do processo de soldadura. Este nível de controlo contribui para melhorar a qualidade da soldadura, aumentando a fiabilidade e o desempenho da placa de circuito impresso montada.