Оглавление
SMT Assembly Process: Watch the Full PCBA Line Tour (Text + Video Guide)
This article was originally published in January 2023 and last updated on May 7, 2026.
Что такое SMT-сборка?
SMT Workshop Environment & Production Capability
Pre-Production Preparation: Design and Incoming Quality Control (IQC)
Step-by-Step SMT Assembly Process
Step 1: PCB Loading and Ionic Dust Removal
Шаг 2: Нанесение паяльной пасты
Шаг 3: Проверка паяльной пасты (SPI)
Step 4: High-Speed Pick and Place
Шаг 5: Пайка оплавлением
- Preheating: Gradual heating from room temperature to ~150°C at 1–3°C/s, allowing solvent evaporation.
- Soaking: Maintained at 150–200°C for 60–120 seconds to activate flux and remove oxides.
- Reflow: Rapid temperature rise to a peak of 240–250°C, with time above the SAC305 solder’s melting point (217°C) controlled to 30–60 seconds to form intermetallic compounds (IMCs).
- Cooling: Rapid cooling to below 150°C at 3–5°C/s, ensuring a fine-grained crystalline structure in solder joints.
Step 6: AI-3D-Automated Optical Inspection (AOI)
Шаг 7: Рентгеновский осмотр
Step 8: First Article Inspection (FAT)
Step 9: Rework
SMT Process Capability Overview - FS Tech
- Printing Capability: Repeatable printing accuracy CPK ≥ 2.0; supports ultra-fine-pitch printing for 01005/0201 components.
- Placement Capability: Panasonic 2+1 high-speed placement configuration; dual-track design; maximum monthly capacity: 325 million points.
- Soldering Capability: 10-zone reflow oven with nitrogen supply; daily calibration of oven temperatures; individual measurement and recording of temperature profiles for each specific product model.
- Inspection Capability: Three-tier inspection system comprising SPI (3D Solder Paste Inspection) → AI-3D-AOI → X-Ray; CCD-based online verification stations are deployed immediately following both the SPI and AOI stages. The FAT (First Article Test) machine features AI-driven intelligent programming and high-precision LRC testing capabilities.
- Traceability Capability: The ERP system enables end-to-end material traceability throughout the entire SMT assembly process; the MES system integrates directly with production equipment to facilitate the digital archiving of SMT process parameters, inspection data, oven temperature profiles, and other critical information.
- Environmental & ESD Capability: The SMT production floor maintains a constant-temperature, constant-humidity, and dust-controlled environment; comprehensive Защита от электростатического разряда measures are implemented at every stage of the SMT manufacturing process.
- Efficiency & Automation Capability: One-touch adjustment functionality allows for simultaneous line-width configuration across the entire production line, resulting in a reduction of line changeover time by over 50%. AGV transport robots and automatic board-flipping machines are scheduled for deployment in 2026.
Заключение
FAQs about SMT Assembly Process
SMT (Surface Mount Technology) involves directly placing the components on the surface of the PCB with the help of a solder paste and reflow oven. THT (Through-Hole Technology) is the process of inserting the leads of components through the holes drilled and soldering them on the other side (usually with the wave soldering). SMT offers the advantage of smaller components and higher component density and faster SMT production when compared with THT that is usually used for larger components which require mechanical strength (like large connectors or transformers).
Читать далее: Difference between SMT and THT
The standard Технологический процесс SMT consists of the following key steps:
Печать паяльной пасты
Solder Paste Inspection (SPI)
Component Placement (Pick & Place)
Пайка оплавлением
Автоматизированная оптическая инспекция (AOI)
In-Circuit Testing (ICT) / Functional Testing
Rework (if necessary)
Modern SMT lines have an auto board width changing feature. Upon a product change, the conveyor rails adjust to the PCB size automatically. An advanced SMT assembly line with one-touch line-width adjustment is able to set the widths of the printer, mounter, and reflow simultaneously, making the overall width changeover time over 50% shorter.
Nitrogen is the gas used in the reflow oven to displace oxygen. By maintaining oxygen levels low (usually 500-2000 ppm), the SMT process helps to prevent solder paste and component leads from being oxidized. As a result, more shiny and strong solder joints with good wetting and fewer solder balls are achieved, which is very important for high-quality SMT PCBA used in the automotive or medical devices industries.
Closed-loop SPI feedback, AI-powered AOI, and very strict process control combined with well-optimized SMT manufacturing line generally enable you to attain a First Pass Yield (FPY) of 98% to 99%. That is, out of 100 boards, 98-99 boards pass all inspections (SPI AOI X-Ray) and no rework is done on the first attempt.
Сотрудничайте с FS Technology и получите профессиональное обслуживание печатных плат.
Похожие блоги
Table of Contents What Is SMT? Surface Mount Technology Explained for PCBA This article was originally published in June 2022 and last updated on August
Table of Contents SMT vs THT: Differences between SMT and THT in PCB Assembly This article was originally published in May 2023 and last updated
Содержание. Компоненты SMD: руководство для начинающих по поверхностному монтажу. Эта статья была первоначально опубликована в ноябре 2022 года и последний раз обновлена в июне…
Содержание Значение печатной платы: Что такое печатная плата в электронном производстве? Эта статья была первоначально опубликована в июле 2022 года и последний раз обновлена в мае.
Содержание SMT против SMD: В чем разница между SMD и SMT? Полное руководство по технологии поверхностного монтажа и поверхностному монтажу…
Содержание. Процесс поверхностного монтажа: полный обзор линии сборки печатных плат (текстовое и видеоруководство). Эта статья была первоначально опубликована в январе…