Índice
Placas de circuito impresso para veículos elétricos: Requisitos de alta tensão e carregamento rápido explicados
The Core Role of PCB in Electric Vehicles
Sistema de gestão da bateria (BMS)
On-Board Charger (OBC)
Electric Drive Inverter and Domain Controller
High-Voltage Requirements for Electric Vehicle PCBs
Operating Voltage and Insulation Design
Component Selection and Spacing Specification
| Electric Vehicle System | Creepage Distance | Creepage Distance |
| 400V DC | 5.5–6.4 mm | 3.0–3.5 mm |
| 800V DC | 10–12 mm | 6.0–8.0 mm |
The Key Role of Materials: CTI
High-Frequency and High-Speed PCB Integration for Autonomous Driving
Coexistence and Collaboration with High-Voltage Systems
- Hybrid Materials and Hybrid Laminates: A single board may require FR-4 for general circuits, Tg alto materials for high-voltage areas, and Rogers layers for RF circuits simultaneously, which drives the development of complex stack-up designs and special lamination processes.
- Ultimate EMC/EMI Protection: High-voltage switch noise can easily interfere with sensitive radio frequency and high-speed digital signals. Solutions include:
- Partitioning and shielding: Strictly isolate in layout, and use grounded shielding walls and shields to form a Faraday cage.
- Precise impedance control and wiring: Perform equal-length and equal-spacing wiring for high-speed differential pairs (such as PCIe, Ethernet) and control characteristic impedance to reduce reflection and crosstalk.
- Collaborative Design of Gestão térmica: High-frequency chips and high-voltage power devices are both heat sources, requiring unified planning of heat dissipation paths in thermal simulation to avoid mutual thermal interference.
Strict Requirements of Fast Charging for EV PCB
Transient Protection and Surge Suppression
Low impedance and high current carrying capacity
Key Design Considerations for High-Voltage Electric Vehicle PCBs
PCB Material Matrix
- High CTI FR-4: Used for general low-voltage and control circuits.
- Poliimida: Used in flexible BMS sampling links.
- IMS (Insulated Metal Substrate): Used in heat-generating components such as OBC and DC-DC.
- DBC (Direct Bonded Copper Ceramic Substrate): Used in the highest-power SiC inverters.
Robust BMS and System Integration
Thermal Management: From Board Level to System Level
Compliance, Safety, and Reliability
- IPC Class 3: Suitable for high-reliability products.
- ISO 26262 functional safety processes
- AEC-Q100 for ICs and AEC-Q200 for passive components
Manufacturing Challenges and Collaborative Solutions of Car PCB Board
Thermal Management Manufacturing Process
Respond to mechanical stress
Signal Integrity and Electromagnetic Compatibility
Precision Manufacturing and Special Processes of Electric Vehicle PCB
- High-precision SMT placement: Domain controllers and BMS boards contain a large number of fine-pitch components such as BGA, QFN, PoP, etc. These components require precise impressão de pasta de solda, multi-axis alignment, and nitrogen reflow soldering.
- Revestimento conforme and Special Coatings: To resist corrosion from condensed water, salt spray, fuel vapor, etc., in the automotive environment, PCBs generally need to be coated with conformal coating. For high-voltage areas, thickened coating, local potting, or the use of coating materials with high dielectric strength (such as Class H) are often employed to provide additional insulation protection and mechanical protection.
- Special processes related to high voltage:
- Enhanced electroplating and creepage grooves: On the pins and creepage paths of high-voltage connectors, thickened copper plating is applied, or isolation grooves (creepage grooves) are milled to increase the surface creepage distance.
- Precision Etching Control: To meet the requirements of copper thickness up to 10 oz/in² or even thicker (for high current carrying), special etching processes are required to ensure line width accuracy and avoid issues such as “over-etching” or “copper residue”.
Conclusão
FAQs
Obter um orçamento
Blogues relacionados
Table of Contents Industrial PCB Assembly: The Complete Guide for Industrial Control & Automation OEMs Failure of the consumer board translates into a repeat. If
Table of Contents Medical PCBA Cost in 2026: What Really Drives the 2.5–4× Premium Over Commercial Boards Medical PCBA costs do not only depend on
Table of Contents PCBA Functional Testing (FCT): A Complete Guide to Ensuring Board Reliability Published on May 9, 2023 · Updated on November 6, 2026
Table of Contents IPC Class 2 vs Class 3: Acceptance Criteria, Cost Impact, and How to Choose IPC Class 2 and Class 3 are the
Table of Contents Ventilator PCB Assembly: ISO 13485, IPC Class 3 & FDA QMSR-Ready Manufacturing Published on June 24, 2022 · Updated on October 30,
Table of Contents Ventilator PCB Assembly: ISO 13485, IPC Class 3 & FDA QMSR-Ready Manufacturing How is air delivered steadily with the help of ventilators,