Teflon PCB

In high-frequency projects, Teflon PCB has become a favored high-performance circuit board, particularly suitable for various high-frequency and radiofrequency projects. Teflon, or polytetrafluoroethylene (PTFE), is a trademark registered by DuPont. Therefore, when we mention Teflon PCB, PTFE PCB, or polytetrafluoroethylene PCB, we are actually referring to the same material.

PTFE laminate was invented by Roy Plunkett in 1938 at the DuPont laboratory in New Jersey and has played a crucial role in the PCB technology field due to its unique dielectric properties. Today, Teflon is increasingly used in complex high-frequency circuits and microwave applications.

If you are looking for a reliable Teflon PCB manufacturer, FS Technology is one of the best choices. In this article, we will delve into some details, including why to choose Teflon PCB, when to use it, alternative solutions, etc., to showcase our professionalism.

Teflon PCB

Why Teflon is the Ideal Material for RF/HF Applications

In RF/high-frequency projects, where signal transmission speeds are extremely fast, the electromagnetic behavior and transmission line characteristics in the circuit have a greater impact on signal integrity. Additionally, issues such as signal dissipation and electromagnetic compatibility are crucial in such scenarios. In this context, the key focus for material selection in 高周波プリント基板 is on parameters such as dielectric constant, dielectric loss, etc. Teflon clearly meets these stringent requirements, providing excellent electrical, mechanical, and thermal performance.

誘電率: To meet high-frequency requirements, the dielectric constant should ideally be in the range of 1 to 10. A lower dielectric constant allows for faster signal transmission, and Teflon’s dielectric constant falls between 2.1 to 2.3. This aids in improving impedance matching in the circuit, ensuring signal integrity at high frequencies.

Dielectric Loss: Minimizing energy loss during signal transmission and processing is essential. The lower the dielectric loss, the better, typically below 10^-4 for RF circuits and below 10^-5 for microwave circuits. Teflon exhibits dielectric loss in the range of 10^-4 to 10^-3, minimizing signal attenuation or distortion during transmission.

Thermal Expansion Coefficient: The thermal expansion coefficient refers to the physical quantity describing the change in volume of an object with temperature variations. In high-frequency applications involving the use of high-power components, this eventually leads to an increase in circuit temperature, thereby impacting circuit performance. On one hand, the thermal conductivity of Teflon laminates ranges from 0.25 W/(m·K) to 0.35 W/(m·K), ensuring superior heat dissipation capabilities. On the other hand, the thermal expansion coefficient of Teflon is approximately 50-150 × 10^(-6) / K, preventing deformation even in high-temperature environments.

When to Use Teflon PCB

Teflon PCB boards are comparatively expensive, and to ensure cost-effectiveness, most modern electronics use FR4 PCB, which can meet the circuit requirements for frequencies ranging from a few kilohertz to several hundred kilohertz, with relatively low rise and fall times. However, in certain devices, working conditions, signal frequencies, or signal integrity requirements may prohibit the use of traditional PCB materials.

High-Frequency Environments: PCB materials for high-frequency circuits demand low loss, stable dielectric constants and dissipation factors, low propagation delay, and effective RF shielding. In such scenarios, materials like Teflon, Rogers, specifically developed for high-frequency environments, become the preferred choice.

Harsh Environments: Industries such as automotive and industrial settings have stringent operational conditions, requiring substrates to withstand high temperatures, pressures, humidity, and corrosion. Materials like Teflon, ceramics, polyimides, etc., are suitable for these challenging environments.

High-Precision Circuits: High-end applications in fields like medical and military projects demand PCB with more intricate circuits to meet comprehensive operational needs. These circuits must be easy to manufacture and construct multi-layers, a challenge that may be difficult to achieve with metals and ceramics. FR4, Teflon, Rogers, and traditional プリント基板製造工程 offer compatibility to easily accomplish this.

High-Power RF Amplifiers: Teflon is an ideal choice for RF amplifiers where PCBs must handle substantial power and heat while effectively propagating high-frequency signals across the board, ensuring signal integrity and stability.

Finding the intersection of these various conditions, Teflon emerges as the optimal solution!

Teflon PCB Manufacturing Process

Teflon PCB manufacturing process involves a series of special processes unlike that traditional process like in the case of FR-4 material. The process involves the following procedures:

表面処理をしてください: The first step in the manufacturing process is making the surface ready for the next steps of the procedure which are layer formation, marking, and metallization. Since it is a delicate material, manufacturers avoid using aggressive techniques like scrubbing or using brushes, instead, etchant solvents are used together with plasma for PTFE laminate surfaces.

ドリリングです。 Drilling Teflon laminate with plated copper requires low drill rpms and slow infeed. This approach eliminates laminate fibers and tailing.

Copper Plating: Plating copper onto Teflon is a delicate process that demands extra care. Given the high z-axis thermal expansion coefficient of PTFE materials, plated copper is utilized in through-hole walls and via walls to enhance tensile strength and reduce the risk of cracking and pad shifting.

Solder Mask Application: ソルダーレジスト is typically applied within 12 hours of etching the Teflon material. For improved adhesion, the etched substrate undergoes a sodium etch cycle or the standard PTFE plasma cycle.

ラミネーション: Copper films are bonded to the Teflon material at pressures ranging from 450 to 500 psi and temperatures up to 700oF. An alternative method employs pre-preg and bonding films with lower melting points, reducing the laminating temperature to 250oF.

Considerations for Teflon PCB Projects

Teflon laminate laminates are inherently more expensive, necessitating careful consideration to optimize project costs. Several factors influence the overall cost of Teflon PCB manufacturing:


The manufacturing cost of a PCB is directly linked to the number of layers it possesses. 多層プリント配線板 involve additional procedures during manufacturing, contributing to higher costs.


があります。 表面仕上げ applied to exposed copper in a finished PCB plays a role in cost. Options like the cost-effective ハスル and the pricier エニグ impact the overall budget.

Panel Size

The dimensions of the Teflon material used significantly affect the manufacturing cost. Larger Teflon material leads to higher PCB costs.

Number and Size of Drills

PCB with numerous drills, especially those with small holes for vias or ground stitching, incur additional costs. Manufacturers may need to employ unconventional methods for drilling, contributing to increased expenses.


The total time required to complete PCB manufacturing, known as lead time, can impact costs. Shorter lead times often result in additional charges.

Types of Materials Used

In addition to the Teflon PTFE laminate, other materials play a role in the manufacturing process. Multilayer Teflon PCB, for instance, require more raw materials, contributing to higher costs.

Teflon Laminate Material Alternatives

Rogers RT/Duroid Series

The Rogers RT/Duroid series, manufactured by Rogers Corporation, consists of PTFE-based materials reinforced with woven glass. Renowned for excellent electrical properties, these materials offer low loss and high thermal stability, making them ideal for various applications.

Isola IS620

Isola IS620 is a PTFE-based laminate designed specifically for high-frequency and microwave applications. With a low dielectric constant, it is well-suited for use in multilayer PCBs, ensuring reliable performance.

Taconic TLX Series

The Taconic TLX Series comprises PTFE-based PCB materials tailored for high-frequency and microwave applications. Known for their advanced properties, these materials contribute to the efficient functioning of electronic circuits.

Dupont Teflon NXT

Dupont Teflon NXT represents a specialized variant of Teflon PCB material. Engineered to deliver stable electrical performance in high-frequency circuits, it meets the demanding requirements of modern electronic applications.

Nelco N4000-7

Nelco N4000-7 is a PTFE-based material from Nelco, specifically designed for high-speed digital and RF/microwave applications. Its unique properties make it well-suited for demanding scenarios where precision and reliability are paramount.



銅ベースPCB 現在、市場に出回っているPCBの99%は銅張積層板(CCL)ですが、これとよく混同される概念が銅ベースです。

続きを読む "

IMS」とは「Insulated Metal Substrate」の略で、絶縁層と金属ベースを組み合わせたものである。絶縁層は以下の材料から作ることができる。

続きを読む "