引用

目次

RoHS Compliance Explained: Standards, Testing, and Certification for Electronics Manufacturers

Global production and dumping of electronic waste (e-waste) are also on the rise annually. If not regulated, the dumped devices emit harmful chemicals that pose a threat to human health and the environment. To counteract this, the European Union (EU) came up with the RoHS Directive.
RoHS Compliance acts as an important measure in controlling this problem by:
 
  1. Removal of poisonous chemicals from electronic equipment.
  2. Encouraging responsible electronics design and recycling.
  3. Harmonizing international standards, enhancing international electronics trade to be safer and more environmentally friendly.

RoHS対応とは？

RoHS指令への準拠とは何ですか？
RoHS, which stands for the Restriction of Hazardous Substances Directive, is an EU directive to prohibit the use of ten hazardous substances in electrical and electronic equipment (EEE). It came into force on 1 July 2006. The latest one, i.e., RoHS 3, includes more restricted substances and puts tighter conditions on the manufacturers.
 
The prime objective of RoHS compliance is to minimize the environmental and health impacts of the commonly used hazardous chemicals in electrical equipment, i.e., lead (Pb), mercury (Hg), and cadmium (Cd), during their entire lifecycle from production to disposal. Electrical devices, if not dumped appropriately, release the said chemicals into the soil and aquatic bodies, which cause long-term environmental pollution and occupational hazards.
 
RoHS works in conjunction with WEEE (Waste Electrical and Electronic Equipment Directive). Whereas RoHS aims to prevent problems by banning hazardous substances at source, WEEE deals with solutions by promoting e-waste recycling and collection.

RoHS対応の主な要件

The Complete List of RoHS Restricted Substances

物質最大濃度値
鉛0.1% (1000 ppm)
水銀0.1% (1000 ppm)
カドミウム0.01% (100 ppm)
六価クロム (Cr6+)0.1% (1000 ppm)
ポリ臭化ビフェニル（PBB）0.1% (1000 ppm)
ポリ臭化ジフェニルエーテル（PBDE）0.1% (1000 ppm)
フタル酸ビス（2-エチルヘキシル）（DEHP）0.1% (1000 ppm)
フタル酸ブチルベンジル（BBP）0.1% (1000 ppm)
フタル酸ジブチル（DBP）0.1% (1000 ppm)
フタル酸ジイソブチル (DIBP)0.1% (1000 ppm)
Note: Cadmium (Cd) shall have a maximum concentration value of 0.01% (100 ppm), and the remaining substances shall have a maximum concentration value of 0.1% (1000 ppm).

Which Products Fall Under the Scope of RoHS?

RoHS compliant encompasses a wide range of electrical and electronic equipment, including:
  • Large and small household appliances
  • IoT and telecommunication equipment
  • Consumer equipment (TVs, audio equipment)
  • Lighting equipment (including LED bulbs)
  • 電気・電子工具
  • 玩具、レジャー用品、スポーツ用品
  • 医療機器 (with some exceptions)
  • 監視・制御機器
  • 特定の除外項目に含まれないその他のEEE
Even when a product is not named specifically, it could fall under the RoHS directive if it contains electronic parts.

The Critical Benefits of RoHS Compliance

Meeting RoHS standards is not just a way of avoiding legal penalties; it is truly beneficial.

For Manufacturers:

  • Access to Markets: Gives access to the EU and other regulated markets. It is compulsory to sell EEE in the EU and the majority of nations which have enacted equivalent legislation.
  • Brand Reputation: Helps in building the reputation of brands by adopting eco-friendly practices. It showcases commitment to the environment and sustainability.
  • Innovation Driver: Drives green product design innovation. Pushes R&D toward greener, safer materials and designs.
  • Reduced Liability: Reduces the risk of future costs for disposing of toxic waste and workers’ exposure.

For the Environment & Consumers:

  • Safer Products: Reduces exposure to known toxins and carcinogens in typical devices. Produces safer, cleaner products
  • Cleaner Recycling: Makes recycling cleaner for the workforce and environment. Promotes the use of recyclable commodities and sustainable commodities
  • Low Toxicity Landfills: Lower toxic waste in landfills. Stopped toxic waste from leaching into soil and groundwater.
  • Sustainable Manufacturing of Electronics: Enables the circular economy through material recovery. Supports global agendas of sustainable 電子機器製造.

How Manufacturers Achieve RoHS Compliance

Material Procurement and Supply Chain Management

It begins with material sourcing that is RoHS compliant. Businesses must ensure all of the 構成要素 — solder to cable insulation — are up to EU standards for the prohibited substances.
This involves:
  • Sourcing from approved suppliers
  • Requesting material declarations and Certificates of Compliance (CoCs)
  • Conducting risk assessments on new materials
 

RoHS Testing and Verification

Laboratory testing is required for validation of compliance. The most widely used methods are:
  • レントゲン Fluorescence (XRF) Screening: A simple, non-destructive screen to detect heavy metals such as lead and cadmium.
  • Wet Chemical Analysis (ICP, AAS, or GC-MS): Provides accurate quantifications of trace materials.
These tests confirm whether a product’s material composition is RoHS compliant prior to entering 大量生産.
 

Record Keeping and Documents

To ensure compliance proof, producers are required to maintain traceable and accurate records:
  • Material declarations and supplier certificates
  • Technical construction records (TCF)
  • RoHS declaration of conformity
Effective record keeping makes regulatory audits and customer trust easier.
 

Labelling and Certification

Products compliant with RoHS are typically labelled with the “RoHS” symbol or with a Declaration of Conformity (DoC).
Many manufacturers also go for third-party certification from well-known organizations like テュフ ラインランド, SGS, インターテックあるいは UL（アンダーライターズ・ラボラトリーズ） to gain credibility in the marketplace.

The RoHS Compliance Testing and Certification Process

Achieving RoHS certification involves several stages:
  1. Sample Preparation: Product samples that are representative of each are collected in compliance with ISO standards.
  2. Substance Testing: Substance testing through XRF testing or chemical analysis is done by labs to detect banned substances.
  3. Result Evaluation: The test results are checked against RoHS standard levels. Non-conforming samples require redesigning or material substitution.
  4. Compliance Report: A detailed laboratory report documents results and acts as evidence of compliance.
  5. Certification Audit (Optional): Approved agencies conduct audits to confirm that the manufacturer’s quality systems continue to comply with RoHS certification requirements.
  6. Surveillance and Renewal: Approved manufacturers are periodically audited for continued compliance.

Common Challenges in RoHS Compliance

  1. Product Redesign and Material Replacement
Replacement of lead solder or mercury parts with materials can compromise product performance and reliability. Engineers need to identify lead-free alternatives and redesign assemblies without compromising electrical or thermal performance.
  1. Complex Supply Chains
Modern electronics contain thousands of components from many suppliers. Making each source comply with RoHS certification requirements necessitates aggressive supply chain visibility and regular supplier audits.
  1. Documentation Management
Inadequate or stale records may cause noncompliance. An efficient documentation system — traceability and version control — must be applied to stay certification compliant.
  1. Reliability Testing
Lead-free soldering creates new reliability concerns such as tin whiskers and thermal fatigue. Suppliers must conduct reliability and qualification testing to make sure lead-free assemblies stay stable over the product’s life.

How to Identify RoHS Compliant Products?

RoHS symbol on rohs-compliant product
Businesses and consumers can check RoHS compliance through several means:
  1. Check the Label For the green “RoHS” symbol or the CE marking that signifies compliance with EU directives.
  2. Inspect Documentation A RoHS compliance declaration or statement of conformity may be available in the product manual or datasheet.
  3. Ask for Certification Documents Ask the manufacturer or supplier for test reports or Certificate of Conformity.
  4. Check from Third-Party Databases Some certification bodies, such as SGS or Intertek, maintain available databases of RoHS-compliant products.

RoHS Compliance in PCB Manufacturing at FS PCBA

Printed circuit boards (PCBs) are one of the most heavily regulated products under RoHS regulation. We adhere strictly to RoHS guidelines through the entire process of PCB manufacturing, from material procurement to delivery at FS PCBA.
Our procedure consists of:
  • Lead-free solder and RoHS-compliant laminates for soldering
  • XRF inspection on all incoming materials
  • Traceability records by production run
  • Using certified suppliers for complete material transparency
By ensuring that all the circuit boards are RoHS compliant, FS PCBA helps customers to provide secure, eco-friendly, and compliant electronic goods to markets around the world.
Need RoHS-Compliant PCB Assembly?
FS PCBA provides fully RoHS-certified PCB manufacturing and assembly solutions. From prototype to mass production, we guarantee compliance, reliability, and environmental responsibility.
👉 FS PCBAにお問い合わせください to get your RoHS compliance PCB quote today.
ここをクリック

結論

RoHS compliance is a legal requirement for any company in the business of manufacturing electronics. Through the restriction of hazardous substances, the RoHS directive enhances environmental protection, consumer safety, and sustainable design in businesses.
 
To any electronics supply chain business entity, a good grasp of the RoHS regulations, testing, and certification procedures is no longer a choice but a requisite for success and survival in the new marketplace.
 
へ FS PCBA, PCB manufacturer, RoHS is not just a regulation to comply with — it’s a dedication to supply safe, lead-free, and environmentally friendly electronics that are consistent with international norms.

FAQs about RoHS Compliance

RoHS stands for Restriction of Hazardous Substances, a directive that limits certain toxic materials in electronic and electrical products.
RoHS focuses on hazardous substances in 電子部品, while リーチ regulates all chemical substances manufactured or imported into the EU.
Yes. All electronic products sold within the European Union must comply with RoHS standard to enter the market legally.
Manufacturers demonstrate compliance through test reports, supplier declarationsそして technical documentation that confirm restricted substances are below the legal limits.
When properly implemented, RoHS compliance maintains or even improves product quality. Modern lead-free soldering と environmentally safe materials ensure reliability while meeting sustainability standards.

お見積もり

関連ブログ