Caractéristiques matérielles de l'ESP32 : broches, convertisseur et processeur

The ESP32, designed by Shanghai Espressif Systems, is a low-cost, low-power microcontroller widely used in the Internet of Things (IoT) and embedded systems. In this article, FS Technology will discuss the characteristics of various hardware modules of the ESP32.

ESP32 Pin Type

Digital GPIO Pins

Digital GPIO pins allow you to switch between high level (3.3V) and low level (0V), providing the convenience of performing simple tasks such as illuminating LEDs, detecting the status of digital sensors (such as switches), and controlling relays. This makes them an ideal choice for handling everyday digital tasks. Need to connect a digital sensor and understand its functionality? These pins can easily handle that. Want to make an LED flash to your rhythm? Just connect it to a digital output pin.

Analog GPIO Pins

Analog GPIO pins are used for analog-to-digital conversion (ADC), allowing you to read analog signals from sensors such as light sensors, temperature sensors, or potentiometers. Analog GPIO pins are particularly important when you need to measure sensors that provide continuous voltage levels. They can convert these analog signals into digital values for further processing.

PWM Pins

PWM pins generate pulse width modulated signals, which are valuable for controlling devices like servos, motors, and dimmable LEDs. PWM pins are used when you need to control the intensity or position of a device that accepts PWM signals. For instance, you can use PWM to control the speed of a DC motor or the brightness of an LED.

I2C Pins

I2C (Inter-Integrated Circuit) pins enable us two way communication with I2 compatible devices, like sensors, displays, and real time clocks. I2C pins are most commonly used when you want to connect or exchange data with multiple I2C devices in a liner fashion. This makes it simple for interfacing with various sensors and peripherals.

SPI Pins

The Serial Peripheral Interface (SPI) pins play a crucial role in achieving high-speed serial communication with devices such as displays, memory modules, and other microcontrollers. For applications that require fast data transfer between the ESP32 and external devices, especially in real-time data exchange, SPI pins are particularly essential.


The UART pins are tasked with supporting asynchronous serial communication, encompassing connections with devices such as GPS modules, Bluetooth modules, and other microcontrollers. When your application requires data transfer with devices using serial communication, UART pins demonstrate significant practicality.

Interrupt Pins

Interrupt pins can generate interrupts when specific events occur, making them suitable for applications that require real-time responsiveness. These pins are used in scenarios where immediate action is needed in response to events, such as detecting rising or falling edges in sensor input.

ADC Converter

ADC, short for Analog to Digital Converter, plays a crucial role in the field of microcontrollers, converting analog signals (such as voltage fluctuations) into digital data understandable and processable by the microcontroller. Analog signals are continuous, varying voltage values, and the function of ADC is to transform this continuity into a series of specific finite digital values.

Motivations for using ADC cover various aspects:

Sensor Integration:

Many sensors, including temperature sensors, light sensors, and analog accelerometers, produce analog outputs. The presence of ADC allows the microcontroller to connect with these sensors and convert their analog readings into digital values for subsequent processing.

Data Acquisition:

In applications like data logging, external sensors and devices generate analog signals. The role of ADC is to capture, record, and analyze this data in digital form, providing broader operability for the application.

Signal Processing:

In audio and video processing, ADC is crucial. It converts continuous waveforms into digital signals, which are easier to process, transmit, and manipulate.

User Input:

In applications featuring potentiometers, analog joysticks, or slider controls, ADC is responsible for converting the user-adjusted analog voltage into digital values to control various parameters within the system.

Regarding the ADC in ESP32, its 12-bit resolution means it can represent analog voltage as digital values ranging from 0 to 4095, providing high-precision analog signal conversion. Its voltage range is between 0 and 3.3 volts, matching its operating voltage, making it suitable for various sensors and devices. The number of channels may vary between ESP32 board models but typically ranges from 18 to 36, allowing the microcontroller to sample data from various analog sources simultaneously.

The sampling rate is another critical factor, and ESP32’s ADC offers different sampling rates, depending on the detailedness of each sample, ranging from kilohertz to megahertz. This also depends on the ESP32 board model and its configuration.

In terms of accuracy and sensitivity, the 12-bit resolution provides highly accurate analog signal conversion, making ESP32 valuable in tasks such as environmental sensing, audio processing, and industrial monitoring.

Regarding the reference voltage, ESP32’s ADC can use internal or external reference voltage, with the choice affecting the range and accuracy of ADC readings. Internal references are generally suitable for most applications, but external references can be used for specific accuracy requirements.

Finally, through software configuration and control, ESP32’s ADC allows personalized settings according to project requirements, including modifications to resolution, attenuation, and input channels, among other parameters.

ESP32 Dual Core Processor

The ESP32 engine is equipped with a dual-core Tensilica Xtensa LX6 processor, meticulously designed by Cadence Design Systems, providing robust performance and versatility. The Xtensa architecture is highly esteemed for its efficiency and flexibility, making it the preferred choice for embedded systems and IoT applications. Both cores of the ESP32 processor can run at clock speeds of up to 240 MHz, and this dual-core design enables simultaneous execution of multiple tasks, particularly suitable for real-time applications.

A prominent feature of the ESP32 processor is its dual-core design, allowing the microcontroller to handle multiple tasks simultaneously. One core is dedicated to specific tasks, while the other manages background processes, significantly enhancing the overall system responsiveness. The Xtensa LX6 core is designed to improve power efficiency, effectively conserving energy when in idle or low-power modes, thereby extending battery life. This makes the ESP32 an ideal choice for battery-powered devices. The inclusion of VFPU enhances the mathematical processing capabilities of the ESP32, which is beneficial for applications requiring complex calculations, such as signal processing or data analysis. Additionally, Xtensa LX6 supports multimedia instructions, enabling efficient handling of audio and video tasks. This is particularly valuable for applications requiring high-performance multimedia streaming or voice recognition.

Blogs associés

Arduino UNO Interrupt Timer

Arduino UNO Interrupt Timer Le Timer est une fonction intégrée dans chaque microcontrôleur et a certaines fonctions concernant le passage du temps. La fonction Timer

Lire plus "

Nous serions ravis de vous entendre